LASER HARDENING PROCESS ON Ck 45 DEPENDING ON THE LASER PARAMETERS - a small review
DOI:
https://doi.org/10.17770/het2022.26.6960Keywords:
Laser hardening, hardening of steel Ck 45, parametersAbstract
This study displays the effect of laser surface hardening parameters on the Ck 45 steel. The method is mostly based on experimental tests, with micro-hardness data being used to obtain the hardness profile Ck 45.The beauty of the surface laser hardening technique is that, it hardens a specific area without changing the surface qualities of the surrounding area. Due to its versatility and capacity to manufacture parts with complex geometry, laser heat treatment is regarded one of the best-performing manufacturing technologies currently in use.Downloads
References
Advances in Mechanical Processing and Design pp 293-304, Santoshkumar V. WaghEmail authorDhananjay V. BhattJyoti V. MenghaniSujit S. Pardeshi.
Lazov, L.,H. Deneva, P. Narica, Factors influencing the color laser marking, 2015, ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference, v. 1, pp. 102-107,https://doi.org/10.17770/etr2015vol1.223
Lazov, L., T. Karadzhov, Methods for Measuring Laser Power. Environment. Technology. Resources. Rezekne, Latvia, Proceedings of the 13th International Scientific and Practical Conference. Volume 3, 173-180, 2021, Online ISSN 2256-070X, DOI: 10.17770/etr2021vol3.6565,
Adel, K. M., (2014). Enhancement of dry sliding wear characteristics of CK45 steel alloy by laser surface hardening processing, Procedia materials science.
Lazov, L., E. Teirumnieks, T. Karadzhov, N. Angelov, Influence of power density and frequency of the process of laser marking of steel products. Infrared Physics and Technology 116 (2021) 103783, DOI: 10.1016/j.infrared.2021.103783, Web of Science IF 2.638
The influence of different conditions of laser-beam interaction in laser surface hardening of steels, Thin Solid Films, J. Grum, T. Kek, 2004
Laser Hardening Process with 2D Scanning Optics, lvia Martínez∗, Aitzol Lamikiz, Iván Tabernero, Eneko Ukar, Department of Mechanical Engineering, University of the Basque Country (UPV-EHU), Spain, Physics Procedia 39 ( 2012 ) 309 – 317
H. Pantsar, et al., “Effect of Processing Parameters on the Microstructure and Hardness of Laser Transformation Hardened Tool Steel,” Proceedings of the 23rd Interna-tional Congress on Applications of Laser and Electro- Optics (ICALEO 2004), San Francisco, California, USA
Martinovs A., et al., Laser hardening process optimization using FEM, Engeneering for rural development, 2020, pp.1500-1508, DOI:10.22616/ERDev.2020.19.TF372
Parker K., Heat Treating with High Power Diode Lasers, www.coherent.com, (408) 764-4983
Maharjan, N.; Zhou, W.; Zhou, Y.; Guan, Y.; Wu, N. Comparative study of laser surface hardening of 50CrMo4 steel using continuous-wave laser and pulsed lasers with ms, ns, ps and fs pulse duration. Surf. Coat. Technol. 2019, 366, 311–320. [CrossRef
Baumann, M.; Balck, A.; Malchus, J.; Chacko, R.V.; Marfels, S.; Witte, U.; Dinakaran, D.; Ocylok, S.; Weinbach, M.; Bachert, C.; et al. 1000 W blue fiber-coupled diode-laser emitting at 450 nm. In Proceedings of the SPIE 10900, High-Power Diode Laser Technology XVII, 1090005, San Francisco, CA, USA, 3–5 February 2019.
Santoshkumar V. Wagh et al 2020 IOP Conf. Ser.: Mater. Sci. Eng., Effects of laser hardening process parameters on hardness depth of Ck45 steel using Taguchi's optimization techniquehttps://iopscience.iop.org/article/10.1088/1757-899X/810/1/012027
