OPTIMIZATION OF PARAMETERS FOR LASER MARKING AND ENGRAVING ON PLYWOOD AND PINE WOOD MATERIALS

Authors

  • Artis Stanislavs Gusts Rezekne Academy of Technologies
  • Imants Adijāns Rezekne Academy of Technologies

DOI:

https://doi.org/10.17770/het2021.25.6795

Keywords:

CO2 laser, laser marking, laser engraving, plywood, pine

Abstract

This publication shows the results of CO2 laser marking and engraving on plywood and pine materials at different speeds and powers. Plywood and pine materials were marked and engraved with four different speed and seven different power ratios. Marked and engraved line depth was measured for these materials. In this publication used SUNTOP CC-9060 CO2 laser machine and OLYMPUS OLS5000 laser microscope.

Downloads

Download data is not yet available.

References

http://www.fao.org/3/ca7415en/ca7415en.pdf (13.04.2021)

Mechanical Properties of Wood, David W. Green, Jerrold E. Winandy, and David E. Kretschmann.

Study of laser cutting and marking on the filt with the help of a CO2-laser, Lazov Lyubomir, Dolchinkov Nikolay Todorov, Ivanov Jordan Shterev, 2019.

Application of the laser cutting of wood-containing materials in construction, A. T. Gabdrakhmanov, A. A. Bobrishev, L. N. Shafigullin, 2018.

https://www.epiloglaser.com/how-it-works/applications/wood-engraving.html (13.04.2021)

http://www.musterkiste.com/en/holz/pro/1029_Pine.html (14.04.2021)

Lydia Sobotova, Miroslav Badida, Laser marking as environment technology, 2017.

https://www.wood-database.com/scots-pine/ (12.04.2021)

https://www.probex.ee/berza_saplaksnis.html (12.04.2021)

http://www.matweb.com/search/datasheet_print.aspx?matguid=bd6620450973496ea2578c283e9fb807 (12.04.2021)

Downloads

Published

2021-04-23

Issue

Section

Mechatronics, production technologies and environmental protection