MODELING THE INFLUENCE OF GRAIN MORPHOLOGY ON THE LASER ENGRAVING PROCESSES
DOI:
https://doi.org/10.17770/etr2024vol3.8182Keywords:
Engraving, Grains morphology, Laser ablationAbstract
The study describes the Monte Carlo modelling of the ablation depth during the laser marking process. The effect of grain size on the resulting roughness is studied. The results were validated by experiments with model samples of pure iron with different grain sizes. The influence of the laser power, speed and raster distance were also studied and commented.
Downloads
References
M. Q. Chau, “An Overview Study On The Laser Technology and Applications in the Mechanical and Machine Manufacturing Industry”, Journal of Mechanical Engineering Research and Developments (JMERD) 42(5), 2019 pp.16-20
N. Angelov, L.Lazov, et al, Influence of pulse duration on the process of laser marking of CT80 carbon tool steel products, Laser Phys., 2021, 31 045601 DOI: 10.1088/1555-6611/abe5af
J. Kusinski er al., “Laser modification of the materials surface layer - a review paper”, Technical Sciences, Vol. 60, No. 4, 2012, DOI: 10.2478/v10175-012-0083-9
L. Lazov, Edmunds Teirumnieks, Tsanko Karadzhov, Nikolay Angelov, Influence of power density and frequency of the process of laser marking of steel products, Infrared Physics & Technology, 2021,Volume 116, 103783, https://doi.org/10.1016/j.infrared.2021.103783.
A. Temmler et al., “Influence of laser polishing on surface roughness and microstructural properties of the remelted surface boundary layer of tool steel H11”, Materials and Design 192, 2020, DOI:10.1016/j.matdes.2020.108689
Y. Ahmed et al, “Laser surface texturing and characterization of austenitic stainless steel for the improvement of its surface properties”, The Int. Journal of Advanced Manufacturing Technology, 2021, v.115. pp. 1795–1808
M. Švantner et al., “Thermal effects of laser marking on microstructure and corrosion properties of stainless steel”, Optical Society of America Vol. 55, No. 34, Applied Optics, 2016, DOI:10.1364/AO.55.000D35
M. Pandey, B. Doloi, “Parametric analysis on fiber laser marking characteristics for generation of square shaped marked surface on stainless steel 304”, Materials Today: Proceedings, 56, 2022), pp. 1908–1913
S. Shin et al., “Wavelength selection for femtosecond laser processing of materials: Comparison of ablation efficiency and surface quality”, Optics & Laser Technology, 2024, v.171, DOI: 10.1016/j.optlastec.2023.110428
C. Chen et al., “Towards obtaining high-quality surfaces with nano metric finish by femtosecond laser ablation: A case study on coppers”, Optics & Laser Technology, 2022, 155(15), DOI:10.1016/j.optlastec.2022.108382
X. Xiang et al., “Study of Nanosecond Laser Ablation on Aluminum and Stainless Steel Targets”, Chinese Journal of Lasers, 2016, 43(2), DOI:10.3788/CJL201643.0203005
Jun-Jie Zhang et al., “Nanosecond Pulsed Laser Ablation on Stainless Steel - Combining Finite Element Modeling and Experimental Work”, Adv. Eng. Materials, 2019, v.21, issue8, doi.org/10.1002/adem.201900193
Karajewski L.J. et al., “Operations management - processes and supply chains”, textbook, Pearson, 2010, pp.177-193
Lazov, L., Angelov, N. Influence of some technological parameters on the contrast of laser marking on the fly. Laser Phys., 2012, 22, 1755–1758 . https://doi.org/10.1134/S1054660X12110084
L. Lazov, et al., Modification of the roughness of 304 stainless steel by laser surface texturing (LST), Laser Physics, 2023, Volume 33, Number 4, DOI:10.1088/1555-6611/acbb76
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Roussi Minev, Veselin Hristov, Danail Gospodinov, Emil Yankov, Mariana Ilieva
This work is licensed under a Creative Commons Attribution 4.0 International License.
