INVESTIGATION OF LASER MARKING ON CHROMIUM-NICKEL SAMPLES
DOI:
https://doi.org/10.17770/etr2024vol3.8175Keywords:
chrome-nickel, laser, marking, power, roughness, speedAbstract
In the present century, laser marking on various materials is increasingly used. Very good results are achieved when working on resistant materials and as in our experiment with chrome-nickel samples.
Chrome-nickel is used in the production of a number of details and products, especially in the military-industrial complex. Experiments were performed on thin chromium-nickel samples and the variation of marking quality with variation of laser speed and power and material roughness was investigated. The results obtained have been analysed and this will enable both the use of the obtained results and the continuation of research. These studies were carried out at the Laser Centre of the Rezekne Academy of Technology during an Erasmus internship.
Downloads
References
N.Dolchinkov, C.Tolev, T. Petrov, E. Dimitrov, G. Petrov, Features of Color Laser Marking on Metals, 14th International Scienfic and Practical conference Environment. Technology. Resources. Vide. Tehnologija. Resursi, 2023, ISSN 1691-5402,3, pp. 297–305
N.Dolchinkov, Marking and Cutting of Non-metallic Products with CO2 Laser, IOP Publishing Ltd. Journal of Physics: Conference Series, Volume 2224, 2021 2nd International Symposium on Automation, Information and Computing (ISAIC 2021) 03/12/2021 - 06/12/2021 Online ISSN: 1742-6596, Print ISSN: 1742-6588, рр 1-8
N.Dolchinkov, Practical research of marking and cutting of textiles with increased resistance, using CO2 laser, Journal of Physics: Conference Series, Volume 1681, 2020, 1681 012014 IOP Publishing The 6th International Conference on Chemical Materials and Process 2-4 July 2020, Warsaw, Poland, doi:10.1088/1742-6596/1681/1/012014 Online ISSN: 1742-6596 Print ISSN: 1742-6588
N.Dolchinkov, Y. Shterev, St. Lilianova, D. Boganova, M. Peneva, L. Linkov, D. Nedialkov, Exploring the possibility of laser cutting with CO2 laser on felt in the range from 1W to 26W power, International scientific journal: Industry 4.0 Issue 1/2019, ISBN 2534-8582, стр. 29-31.
L.Lazov, N.Angelov, The 50th anniversary of laser, Technical University of Gabrovo, Bulgaria, 2010.
S. Sharaf, R. Nofal, E. Sakr, Effects of Co2 Laser Cutting Technique on Bending Properties of Cotton and Cotton Blended Fabrics, International Design Journal, Vol. 14 No. 2, (March 2024) pp 297-312
L.Lazo, H. Deneva, E. Teirumnieka, Study of Auxiliary Gas Pressure on Laser Cutting Technology, Environment. Technology. Resources, Rezekne, Latvia Proceedings of the 11th International Scientific and Practical Conference. Volume III, 159-162
L.Lazov, E. Teirumnieks, Application of laser technology in the army, Proceedings of International Scientific Conference “Defense Technologies”, Faculty of Artillery, Air Defense and Communication and Information Systems, Shumen, Bulgaria, 2018
M. Zoghi, A. J. Dehkordi, CW CO2 laser cutting of multiple-layer blended fabric, Optik, Volume 287, 2023, 171168, ISSN 0030-4026, https://doi.org/10.1016/j.ijleo.2023.171168.
Y.Shterev, N. Dolchinkov, St. Lilianova, D. Boganova, M. Peneva, L. Linkov, D. Nedialkov, Еxamining the possibility Of marking and engraving of textiel using CO2 laser, International journal for science Machines, Technologies, Materials 12/2018 стр 491-493
Y.Shterev, N. Dolchinkov, St. Lilianova, D. Boganova, M. Peneva, L. Linkov, D. Nedialkov, Laser marking and cutting of plexiglas with CO2 , International journal for science Machines, Technologies, Materials 4/2018 стр 494-496.
L.Lazov, N.Angelov N., Scanning the contrast in function of velocity in laser marking of samples of steel, International Scientific Conference, Gabrovo, 2010.
Lazov L., Dolchinkov N. T., Shterev Y., Boganova D., Peneva M, Study of laser cutting and marking on the filt with the help of a CO2-laser, 12th International Scienfic and Practical conference Environment. Technology. Resources. ISBN 1691-5402, Vol 3, 20-22.06.2019, Rezekne, Latvia, р. 143-147, DOI.org/10.17770/ETR2019VOL3.4202;
L.Lazov, N.T.Dolchinkov, Y.Shterev, St.Lilianova, A.Pacejs, Use of CO2 laser for marking and clearing of textile materials for manufacture of military equipment, 12th International Scienfic and Practical conference Environment. Technology. Resources. Vol 3, 20-22.06.2019 г. Rezeknе, Latvia, ISBN 1691-5402, стр. 32-36;
L. Lazov, N.T. Dolchinkov, Y.Shterev, L. Linkov, D. Nedialkov, Study of cutting and labeling of polymethylmethacrylate using a CO2 laser, 12th International Scienfic and Practical conference Environment. Technology. Resources. ISBN 1691-5402, Vol 3, 20-22.06.2019 г. Резекне, Латвия, стр. 37-40.
N.Padarev, L. Lazov, M. Yovchev, L. Linkov, The Change of Contrast is Investigation of 75 Steel Samples Laser Marked with Different Modes, Environment. Technology. Resources. Rezekne, Latvia Proceedings of the 14th International Scientific and Practical Conference. Volume 3, pp 334-338, Print ISSN 1691-5402 Online ISSN 2256-070X Published by Rezekne Academy of Technologies, 2023
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Nikolay Dolchinkov, Milen Tortorikov
This work is licensed under a Creative Commons Attribution 4.0 International License.
