OPTIMIZING 3D PRINTING PARAMETERS TO IMPROVE HARDNESS AND SURFACE ROUGHNESS
DOI:
https://doi.org/10.17770/etr2024vol3.8145Keywords:
3D printing, hardness, surface roughnessAbstract
The purpose of this paper is to study the factors affecting roughness and hardness of 3D printed models. Two parameters are analyzed- 3D printing speed and layer thickness. The main disadvantage of 3D printed models is their higher roughness, which depends on the printing parameters. In order to obtain parts with smoother surfaces, it is necessary to study these parameters. Based on the obtained experimental results, a regression dependence was built describing the relationship between roughness and hardness with the investigated printing parameters.
Downloads
References
Lupton D.,(2023)3D printing, The Blackwell Encyclopedia of Sociology,DOI: 10.1002/9781405165518.wbeos1072.pub2
Liu K.,Hu N.,yu Z.,Zhang X.,Ma H.,Qu H.,Ruan H.,(2023), International Journal of Bioprinting,DOI: 10.36922/ijb.0969
Son J., Lee H.(2020) Effect of Frictional Characteristics on Surface Roughness and Glossiness in Polishing of ABS-Like Resin, Journal of the Korean Society for Precision Engineering
Daneshvar F. N. Talebbeydokhti N.,Dehghan S., Elhamian S.,{2023},,Evaluation of internal surface roughness in fiberglass pipes by surface roughness instruments,
Hanon M.,Zsidai L.,(2023) Investigation on the accuracy, hardness, and surface roughness of photopolymerization 3D printing technique objects, 36th Conference of the Polymer Processing Society (PPS-36)At: Montreal, CanadaVolume: 2607
Maturkar P.,(2023),DESIGN AND DEVELOPMENT OF 3D PRINTER, DOI: 10.55041/IJSREM18917
Wang Z.,Zhou K.,bi C.,(2024),Exploring Flexural Performances of Fused Filament Fabrication 3D-Printed ABS and ABS-Composites through Innovative Bio-Inspired Processing Parameter Optimization, Applied Composite Materials,Applied Composite Materials,DOI: 10.1007/s10443-023-10191-z
Ehrmann C.,Li N.,Ahmad M.,Yahua A.,(2023),Effects of 3D Printing Parameters on Mechanical Properties of ABS Samples, Designs 7(6):136,DOI: 10.3390/designs7060136
Ahmed A.,Mugendiran V.,(2024),Effect of process parameters on mechanical properties of PLA resin through LCD 3D printing, Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering,DOI: 10.1177/09544089231225147
Yang Y.,Dai X.,Yang B.,Zou P.,Gao F.,Duan J.,Wang C.,Optimization of polylactic acid 3D printing parameters based on support vector regression and cuckoo search, Polymer Engineering and Science 63(1),DOI: 10.1002/pen.26440
Tamura R.,Terayama K.,Sumita M.,Tsuda K.,[2023]Ranking Pareto optimal solutions based on projection free energy, Physical Review Materials
Udalov A.,V.,Udalov A.,A.,{2023}Indentation size effect and hardness of materials. E3S Web of Conferences
Kothadamaran L.,Balasubramanian N., (2023), Optimization of the Printing Parameters to Improve the Surface Roughness in Fused Deposition Modeling, E3S Web of Conferences 399
Berggren N.,{2023},Coefficients of determination measured on the same scale as the outcome, DOI: 10.31234/osf.io/svuf8
Saghir A.,Gadde S.,Aslam M.,Janjua A.,(20240,Pareto Distribution-Based Shewhart Control Chart for Early Detection of Process Mean Shifts, Journal of Statistical Theory and Applications
Pacheko F.,(2023),Pareto vectors of continuous linear operators, Journal of Inequalities and Applications 2023(1)
DOI: 10.1186/s13660-023-03071-4
Trijoulet V.,Albertsen C.,Kristensen K.,Legaut C.,Miller T.,Nielsen A.,(2023) Model validation for compositional data in stock assessment models: Calculating residuals with correct properties, Fisheries Research 257:106487,DOI: 10.1016/j.fishres.2022.106487
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Sabi Sabev, Konstantin Chukalov, Valeri Bakardzhiev, Agop Izmirliyan
This work is licensed under a Creative Commons Attribution 4.0 International License.
