DESIGNING A LABORATORY STAND FOR TESTING IMPACT RESISTANCE OF PLASTIC FILMS BY FREE-FALLING DART DROP ACCORDING ASTM D1709

Authors

  • Sabi Sabev Technical University of Sofia, Branch Plovdiv (BG)
  • Konstantin Chukalov Technical University of Sofia, Branch Plovdiv (BG)
  • Valeri Bakardzhiev Technical University of Sofia, Branch Plovdiv (BG)

DOI:

https://doi.org/10.17770/etr2024vol3.8139

Keywords:

dart drop impact test, plastc films, CAD/CAE, ASTM 1709, properties of plastics

Abstract

In this article, the process of designing a laboratory stand for testing impact resistance of plastic films using free-falling dart drop method according to ASTM D1709, type A will be followed. It will be analyzed the all stages of designing-synthesis of project solutions, analysis and optimization, assessment and presentation of tasks. The purpose of the article is to create a designing basis for the variable design of impact resistance stands to be used in the design of non-standardized laboratory equipment.


Supporting Agencies
The author/s would like to thank the Research and Development Sector at the Technical University of Sofia for the financial support.

Downloads

Download data is not yet available.

References

Ning h.,Ren H.,Wang W.,Nie X.,[2023],Impact Resistance of Ultra-High-Performance Concrete Composite Structures, Materials 16(23):7456, DOI: 10.3390/ma16237456

Chen S.,Yu X.,Shi X.,[2024]The influence of fiber content and voltage on the impact resistance of carbon fiber reinforced concrete Journal of Physics Conference Series 2680(1):012021

DOI: 10.1088/1742-6596/2680/1/012021,

Maruyama T.,Iguchi M.,(2023)Impact Resistance Test of Cladding by Using Gravel, Journal of Disaster Research 18(8):918-923,DOI: 10.20965/jdr.2023.p0918

Skodlung D.,Roy R.,Cavender F.,{2023}Synthetic Polymers, DOI: 10.1002/0471125474.tox088.pub3

Mariet C.,Silva T.,Rezende M.,(2023)Influence of 2D and 3D Arrangements of Aramid Fibers on the Dart Drop Test of Epoxy Composites, Journal of Aerospace Technology and Management 15(020002)DOI: 10.1590/jatm.v15.1308

R.,Ciardiello Niuatta C.,Tridello A.,Paolino D.,{2023}Impact Response of Carbon Fiber Composites: Comparison Between Epoxy and Bio-Based Epoxy Matrices, DOI: 10.1007/978-3-031-28547-9_31,Dynamic Response and Failure of Composite Materials,

Brown L.,Monir S.,Jones M.,Luhyna L,Day R.,Vagapov Y.,(2023)A Review of Impact Drop Testing of Composite Laminate Plates2023 15th IEEE International Conference on Industry Applications (INDUSCON)At: Sao Paulo, Brazil, DOI: 10.1109/INDUSCON58041.2023.10374667

Yang L.,Wang D.,Bai D.,Zhang C.,Liu C.,Huang G.,(2023},Investigation of the corrosion behavior of 6082 aluminum alloy in deicing salt, Materials and Corrosion 75(1), DOI: 10.1002/maco.202313937

Aslam M.,Chandan G.,Chandan G.,(2023),Development of SiC Ceramic Reinforced Composite Interlayer Cladding with AISI304 Stainless Steel Wire on Low Carbon Steel Substrate Using TIG Cladding Process, Silicon 15(18):1-11,DOI: 10.1007/s12633-023-02613-1

Standard ASTM D1709

Chetrokov I.,Salapateva S.,Georgiev V.,(2011),Integrating dimensional analyses within the contemorary CAD/CAM technologies, SCIENTIFIC PROCEEDINGS VIII INTERNATIONAL CONGRESS "MACHINES, TECHNOLОGIES, MATERIALS" , PRINT ISSN 1310-3946

Zhao X.,(2021),Finite-Element Analysis on Lightweight Material of Drive Axle Housing, Revue des composites et des matériaux avancés 31(1):41-49DOI: 10.18280/rcma.310106

Li J.,Zhang J.,Meng Q.,(2023)The Effect of Clamping Force and Friction Coefficient on The Clamping Clamp, Academic Journal of Science and Technology 7(1):200-205,DOI: 10.54097/ajst.v7i1.11369LicenseCC BY 4.0

Zhang Y.,Sun W.,Du D.,Ji W.,Ma H.,(2023)Nonlinear modeling and analysis of spatial pipeline with arbitrary shapes supported by clamps considering displacement-dependent characteristic, Mechanics Based Design of Structures and Machines, DOI: 10.1080/15397734.2023.2277773

Rufer A.,(2023),The Pneumatic Motor with Linear Cylinders, Semi-rotary and Linear Actuators for Compressed Air Energy Storage and Energy Efficient Pneumatic Applications, DOI: 10.2174/9789815179095123010006

Sokolov V.,Krol O.,Golubenko O.,Tsankov M.Marchenko D.,(2022),,Dynamics of Clamping Pneumatic Cylinder for Technological Equipment, Advanced Manufacturing Processes IV, DOI: 10.1007/978-3-031-16651-8_6

Liu X.,He Y.,Zhang S.,(2023),Civil Aircraft Electrical System Development Using Model-Based System Engineering, Advances in Engineering Technology Research, DOI: 10.56028/aetr.8.1.787.2023

Zheng D.,(2023),Design of Static Strength Analysis Software for Conveyor Head Tripod Based on ANSYS and MATLAB, Applied Mathematics, Modeling and Computer Simulation

Majeed A.,(2022),Ansys Software for Mechanical Engineering, DOI: 10.13140/RG.2.2.18076.97927

Alizadesh Y.,{2020},Design and Structural Analysis of Composite Prosthetic Running Blades for Athletes: A case of dynamic explicit analysis using Abaqus CAE, DOI: 10.13140/RG.2.2.20693.04327

Karpushkin S.,Glebov A.,(2021),A method of designing equipment for heat processing of polymer workpiece. Journal of Physics Conference Series 2094(2):22016, DOI: 10.1088/1742-6596/2094/2/022016

Downloads

Published

2024-06-22

Issue

Vol. 3 (2024): Environment. Technology. Resources. Proceedings of the 15th International Scientific and Practical Conference. Volume 3

Section

Engineering Sciences and Production Technologies

License

Copyright (c) 2024 Sabi Sabev, Konstantin Chukalov, Valeri Bakardzhiev

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
S. Sabev, K. Chukalov, and V. Bakardzhiev, “DESIGNING A LABORATORY STAND FOR TESTING IMPACT RESISTANCE OF PLASTIC FILMS BY FREE-FALLING DART DROP ACCORDING ASTM D1709”, ETR, vol. 3, pp. 268–273, Jun. 2024, doi: 10.17770/etr2024vol3.8139.