RESEARCH INTO THE ACCURACY OF HOLES IN 3D PRINTING USING TAGUCHI METHOD

Authors

  • Valeri Bakardzhiev Technical University of Sofia, Branch Plovdiv (BG)
  • Sabi Sabev Technical University of Sofia, Branch Plovdiv (BG)
  • Konstantin Chukalov Technical University of Sofia, Faculty of Industrial Technology (BG)
  • Plamen Kasabov Technical University of Sofia, Branch Plovdiv (BG)

DOI:

https://doi.org/10.17770/etr2023vol3.7254

Keywords:

3D print, Taguchi's method, DOE, FDM

Abstract

The article discusses the impact of two factors on the accuracy of the hole sizes - print speed and layer thickness in 3D printing. Nine samples of the ABS polymer were printed by using a 3D printer, then the impact of both of the factors on the accuracy of 3D printing of the holes was evaluated. Taguchi's method was applied with the help of DOE in Minitab to evaluate the impact of the two factors.

Supporting Agencies
The scientific research, the results of which are presented in the paper, was financed by project BG05M2OP001-1.002-0023 - Competence Center "Intelligent Mechatronic, Eco- and Energy-Saving Systems and Technologies" of Technical University of Sofia, branch Plovdiv

Downloads

Download data is not yet available.

References

N. Cuong, N. Duy, H. Nghi, N. Tho,, Application of Box-Behnken, ANN, and ANFIS Techniques for Identification of The Optimum Processing Parameters for FDM 3D Printing Parts” Journal of Industrial Engineering and Halal Industries. 3. p.64-86. 2022 E-ISSN 2722-8142

X. Zhao, W. Ma, W. Aiyiti, A. Kasimu, R. Jia, “Investigation of influence of printing modes on the quality of 6-PSS FDM 3D printed thin-walled parts”, Results in Engineering, Volume 17, 2023, ISSN 2590-1230,

https://doi.org/10.1016/j.rineng.2023.100926.

T. Kalavathi Devi, E.B. Priyanka, P. Sakthivel,”Paper quality enhancement and model prediction using machine learning techniques”, Results in Engineering, Volume 17, 2023, 100950, ISSN 2590-1230,

https://doi.org/10.1016/j.rineng.2023.100950.

S. Chowdhry, “Improving Strength of 3D Print Using RSM”, International Journal of Engineering and Applied Sciences (IJEAS). 9. 6-8. 2022

S. Sunder, V. Sahithi. “Process Parameter Optimization of FDM 3D Printer Using PETG and Carbon Fiber PETG.” Materials Science Forum. Trans Tech Publications, Ltd., March 24, 2023. https://doi.org/10.4028/p-y4081e.

P. Pristiansyah, H. Hasdiansah, A. Ferdiansyah. “Pengaruh Parameter Proses Pada 3D Printing FDM Terhadap Kekuatan Tarik Filament ABS CCTREE”. Manutech : Jurnal Teknologi Manufaktur, vol. 14, no. 01, June 2022, pp. 15 -22, doi:10.33504/manutech.v14i01.210.

A. Bist, R. Dobriyal, M. Gwalwanshi, S. Avikal, „Influence of layer height and print speed on the mechanical properties of 3D-printed ABS“ AIP Conference Proceedings 8 November 2022; 2481 (1): 020012. https://doi.org/10.1063/5.0107304

O. Zemcik i J. Sedlak, "Application of Linear Optimization on Parameters of 3D FDM Print", Tehnički vjesnik, vol.26, br. 4, str. 1164-1170, 2019. [Online]. https://doi.org/10.17559/TV-20170506140109

V.Cabreira, R.Santana,”Effect of infill pattern in Fused Filament Fabrication (FFF) 3D Printing on materials performance”, Matéria (Rio J.) 25 (03) • 2020 • https://doi.org/10.1590/S1517-707620200003.1126

FlashFofge , FlashForge Creator 3, March 2023. [Online]. Available:

https://www.flashforge.com/product-detail/flashforge-creator-3-pro-3d-printer [Accessed: March 18, 2023].

FlashFofge , FlashPrint 5, March 2023. [Online]. Available:

https://www.flashforge.com/product-detail/FlashPrint-slicer-for-flashforge-fdm-3d-printers [Accessed: March 18, 2023].

AutoDesk , Inventor Pro 2023, March 2023. [Online]. Available: https://www.autodesk.com/products/inventor/overview?term=1-YEAR&tab=subscription [Accessed: March 18, 2023].

Minitab , March 2023. [Online]. Available:

https://www.minitab.com/en-us/solutions/analytics/statistical-analysis-predictive-analytics/[Accessed: March 18, 2022

A. Parida, B. Routara, R.Bhuyan, „Surface roughness model and parametric optimization in machining of GFRP composite: Taguchi and Response surface methodology approach“, Materials Today: Proceedings, Volume 2, Issues 4–5, 2015, Pages 3065-3074, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2015.07.247.

D. Shah, K. Kamdar, S.Vaity, “Optimization of EDM Process Parameters Using GRA & Taguchi Method”, Proceedings of International Conference on Intelligent Manufacturing and Automation. Lecture Notes in Mechanical Engineering. Springer, Singapore, 2023 https://doi.org/10.1007/978-981-19-7971-2_20

N. Borra, V. Neigapula, "Parametric optimization for dimensional correctness of 3D printed part using masked stereolithography: Taguchi method", Rapid Prototyping Journal, Vol. 29 No. 1, pp. 166-184, 2023 https://doi.org/10.1108/RPJ-03-2022-0080

N. Lokesh, P. Pattanayak, B. Das, H.C., P. Mahanta, “Evaluation and Optimization of Process Parameter for Surface Roughness of 3D-Printed PETG Specimens Using Taguchi Method at Constant Printing Temperature”, Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore, 2023 https://doi.org/10.1007/978-981-16-9057-0_22

M. Ahmad, A. Mohamad, “Analysis on Dimensional Accuracy of 3D Printed Parts by Taguchi Approach.” Advances in Mechatronics, Manufacturing, and Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore, 2021 https://doi.org/10.1007/978-981-15-7309-5_22

М.Wicaksono, F.Nugraha, “Optimization of 3D Printing Parameters Using the Taguchi Method to Improve Dimensional Precision”, Jurnal Teknologi, 12(2), pp. 70–75. 2022 doi: 10.35134/jitekin.v12i2.72.

I.Mitropoulou, M. Bernhard, B.Dillenburger, “Print Paths Key-framing Design for non-planar layered robotic FDM printing” SCF '20: Proceedings of the 5th Annual ACM Symposium on Computational Fabrication November 2020 Article No.: 6Pages 1–10 https://doi.org/10.1145/3424630.3425408

L.Galantucci, I.Bodi, J.Kacani, F. Lavecchia, Fulvio,” Analysis of dimensional performance for a 3D open-source printer based on fused deposition modeling technique. 3rd CIRP global web conference on Production Engineering Research:Advancement beyond the state of the art.” Conference: 3rd CIRP Global Web Conference on Production Engineering Research: Advancement Beyond State of the Art, CIRPe 2014 Code 113630At: Naples; ItalyVolume: Procedia CIRP 28 (2015) 82 – 87 DOI: 10.13140/2.1.2140.1928

G.Percoco, L.Galantucci, F.Lavecchia, “Validation Study of an Analytical Model of FDM Accuracy.” In book: DAAAM International Scientific Book 2011Chapter: 48 Publisher: Publisher DAAAM International Vienna DOI: 10.2507/daaam.scibook.2011.48

M.Zagorski,Y.Sofronov,D.Ivanova, K.Dimova, “Investigation of different FDM/FFF 3D printing methods for improving the surface quality of 3D printed parts.” AIP Conference Proceedings, 2022 2449. 060001. https://doi.org/10.1063/5.0090805

Downloads

Published

2024-01-16

Issue

Vol. 3 (2023): Environment. Technology. Resources. Proceedings of the 14th International Scientific and Practical Conference. Volume 3

Section

Engineering Sciences and Production Technologies

How to Cite

[1]
V. Bakardzhiev, S. Sabev, K. Chukalov, and P. Kasabov, “RESEARCH INTO THE ACCURACY OF HOLES IN 3D PRINTING USING TAGUCHI METHOD”, ETR, vol. 3, pp. 36–40, Jan. 2024, doi: 10.17770/etr2023vol3.7254.