STUDY ABOUT THE INFLUENCE OF THE PROCESS PARAMETERS OF VIBRO IMPACT CUTTING OF OPTICAL SLUGS ON THE PRODUCTIVITY OF THE PROCESS
DOI:
https://doi.org/10.17770/etr2023vol3.7248Keywords:
optical slug, productivity, parameter, vibro- impact, cuttingAbstract
In the article, experimental studies were carried out, contributing to determination of degree of influence of the parameters of the modes of vibro-impact cutting of optical slugs on the productivity of the process. The optimal frequencies of the forced oscillations of the technological system "slug-cut disc" were reported, in which the durability of the tool and the quality of the obtained surfaces are maximum.
Downloads
References
T. Kuzmanov, H. Metev, K. Kumov. Mathematical Models of Machining Parts with Complicated Rotation Form on CNC Machines. Journal of the Technical University of Gabrovo, vol. 46, pp. 44-47. ISSN 1310-6686, 2013.
T. Kuzmanov, I. Amudzhev, K. Kumov. Influence of the Manufacturing Parameters on the Quality and the Productivity Under Treatment of Workpieces Made of Metal Ceramic Alloy by Infinite Elastic Diamond Tape. Mechanical Engineering and Mechanical Science, Technical University of Varna, vol. 11, pp. 11-14. ISSN 1312-8612, 2009.
V. S. Mironov, A. M. Bocharov, A. F. Klimovich. Increasing the productivity of the process of mechanical driling of single crystals by using the phenomenon of electrification of the processing zone, Superhard materials, 1985, Vol. 3, pp. 1-2.
C. C. Girdu et al, Estimation of laser cutting process efficiency, IOP Conference Series: Materials Science and Engineering, 9th International Scientific Conference - Research and Development of Mechanical Elements and Systems, 5–7 September 2019, Kragujevac, Serbia, 2019, Volume 659, DOI 10.1088/1757-899X/659/1/012045.
E. Markauskas, L. Zubauskas , P.Gečys, Efficient milling and cutting of borosilicate glasses through a thin flowing water film with a picosecond laser. J. Manuf. Process. 2021;68:898–909, doi: 10.1016/j.jmapro.2021.06.013.
E. Markauskas, L. Zubauskas at el., Efficient Water-Assisted Glass Cutting with 355 nm Picosecond Laser Pulses, Micromachines 2022, 13(5), 785, https://doi.org/10.3390/mi13050785.
F. Parreño, M.T. Alonso, R. Alvarez-Valdes, Solving a large cutting problem in the glass manufacturing industry, European Journal of Operational Research, Vol. 287, Issue 1, 2020, pp. 378-388, https://doi.org/10.1016/j.ejor.2020.05.016.
Y. Huang, B. Fan, Y. Wan, S. Li, Improving the performance of single point diamond turning surface with ion beam figuring, International Journal for Light and Electron Optics-Optik, Vol. 172, 2018, pp. 540-544, https://doi.org/10.1016/j.ijleo.2018.07.039.
Y. Ito , Kizaki T, Shinomoto R at el., High efficiency and Precision Cutting of Glass by Selective Laser-assisted Milling, Journal of the International Societies for Precision Engineering and Nanotechnology Precision Engineering, Vol. 47, 2017, pp.498-507, https://doi.org/10.1016/j.precisioneng.2016.10.005.
Samuel Arba-Mosquera, Pascal Naubereit, Simas Sobutas, and Shwetabh Verma, Analytical optimization of the cutting efficiency for generic cavitation bubbles , Biomedical Optics Express, Vol. 12, Issue 7, 2021, pp. 3819-3835, https://doi.org/10.1364/BOE.425895.
X. Liu, D. Yu, D. at el., Self-tuned ultrasonic elliptical vibration cutting for high-efficient machining of micro-optics arrays on brittle materials, Journal of the International Societies for Precision Engineering and Nanotechnology Precision Engineering, Vol. 72, 2021, pp. 370-381, https://doi.org/10.1016/j.precisioneng.2021.05.007.
