STUDY OF THE KINEMATIC AND DYNAMIC OF INTERACTION OF A VIBRATING SYSTEM FOR CUTTING OPTICAL SLUGS

Authors

  • Angel Lengerov Department of Mechanical Engineering and Technologies, Technical University of Sofia, Plovdiv Branch (BG)
  • Kalin Krumov Department of Mechanical Engineering Equipment and Technologies, Technical University of Gabrovo (BG)
  • Georgi Levicharov Department of Mechanical Engineering and Technologies, Technical University of Sofia, Plovdiv Branch (BG)

DOI:

https://doi.org/10.17770/etr2023vol3.7242

Keywords:

kinematic, dynamic, study, vibrating system, optical slug, cutting

Abstract

In the article, studies of the kinematics and dynamics of interaction of the elements of the vibration system "slug-cut disk" are made. A mathematical model describing the trajectory of a cutting arm has been created and the technological parameters of the system at which the phenomenon of resonance occurs have been determined.

Supporting Agencies
This work was supported by the European Regional Development Fund within the OP “Science and Education for Smart Growth 2014-2020”, Project Competence Centre “Smart Mechatronic, Eco-And Energy Saving Systems And Technologies”, № BG05M2OP001-1.002-0023.

Downloads

Download data is not yet available.

References

I.M. Bykovsky Fundamentals of the theory of vibration technology. M.: Mashinostroenie, 1998, p.362.

Sergiev A P, Vladimirov A A, Makarov A V and Shvachkin E G, The physical basis of the process of vibration cutting during turning, Scientific-theoretical journal Herald of the Belgorod State Technological University 3,pp.94 – 102, 2017.

Sergiev A P, Vladimirov A A and Shvachkin E G, Optimization of technological parameters during vibration cutting, Vestnik mashinostroeniya 3, pp. 79 – 82, 2017.

Mikheyev V V, Saveliev S V and Permyakov V B Comprehensive approach to the selection of the optimal energy-effective mode of operation of vibration rollers, Problems of mechanical engineering. Materials of the 3rd International Scientific Conference pp 158-165, 2019.

S. Sabev, P. Kasabov. The effect of feed rate and cutting speed to surface roughness during hole boring of aluminum with anti-vibration boring bar. Environment. Technologies. Resourced. Proceeding of the International Scientific and Practical Conference, 2021. 3. 314-318, doi: 10.17770/etr2021vol3.6537.

S. Sabev, P. Kasabov. The influence of feed rate and cutting speed to surface roughness during hole boring of AISI 304 with anti-vibration boring bar. AIP Conference Proceedings. 2449.060004.10.1063/5.0091006.

Śniegulska-Grądzka D, Nejman M and Jemielniak K, Cutting force coefficients determination using vibratory cutting, Ischia: 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering – CIRP ICME '16. Procedia CIRP 62, pp. 205 – 208, https://doi.org/10.1016/j.procir.2016.06.091.

Wang G F, Hu Y B, Zhu W Q, Bao Z Y, Chen Z J, Huang Z H and Wang W, The design of a compaction parameters management system for intelligent vibratory roller, IEEE 3rd Information Technology and Mechatronics Engineering Conference (ITOEC) pp 634 – 638, 2017, DOI: 10.1109/ITOEC.2017.8122375.

Hyung Tae Kim, An Mok Jeong, Hyo Young Kim, Jong Wook An, Cheol Ho Kim, Kyung Chan Jin and Seung-Bok Choi, Lateral vibration control of a precise machine using magneto-rheological mounts featuring multiple directional damping effect, Smart Materials and Structures, Volume 27, Number 3, 2018, DOI 10.1088/1361-665X/aaad9e.

G. Scott. Experimental estimation of thermal processing possibilities of crystal glass. New works on friction and wear. M., 1989, pp. 78-84.

Downloads

Published

2024-01-16

Issue

Vol. 3 (2023): Environment. Technology. Resources. Proceedings of the 14th International Scientific and Practical Conference. Volume 3

Section

Engineering Sciences and Production Technologies

How to Cite

[1]
A. Lengerov, K. Krumov, and G. Levicharov, “STUDY OF THE KINEMATIC AND DYNAMIC OF INTERACTION OF A VIBRATING SYSTEM FOR CUTTING OPTICAL SLUGS”, ETR, vol. 3, pp. 149–153, Jan. 2024, doi: 10.17770/etr2023vol3.7242.