INDUSTRY 4.0 – ADVANTAGES ANDCHALLENGES IN THE REPUBLIC OF BULGARIA
DOI:
https://doi.org/10.17770/etr2021vol1.6511Keywords:
digitalization, Industry 4.0, strategyAbstract
A retrospective review of the innovation process with its advantages, as well as the challenges in the conditions of Industry 4.0 in the Republic of Bulgaria. The emphasis is on digitalization and the strategy for its implementa-tion, as part of the national strategy for increasing the competitiveness of production and the economy.
Downloads
References
Angelova, Y., Lazov, L., Mezinska, S., Innovative laser technology in textile industry: Marking and engraving, (2017) Vide. Tehnologija. Resursi - Environment, Technology, Resources, 3, pp. 15-21. DOI: 10.17770/etr2017vol3.2610
Damianov, D., Modern alternatives to rapid innovative aging, Scientific Bulletins of NTS in Mechanical Engineering, Year XXVI, Vol. 3/224, ISSN 1310–3946, 27 ISTC “ADP 2018”, June 2018, pp. 278-283.
Kartunov S., D. Petrova, Educations – development innovation of program „Nano-microsystems and electronics technique“, DANUBIA – ADRIA 26th Symposium on Advances in Experimental Mechanics, September 23rd – 26th, 2009 Montanuniversität Leoben / Austria, ISBN: 978-3-902544-02-5, pp. 103-105.
Lazov, L., H., Deneva, Teirumnieka, E., Study of auxiliary gas pressure on laser cutting technology, (2017) Vide. Tehnologija. Resursi - Environment, Technology, Resources, 3, pp. 159-162., DOI: 10.17770/etr2017vol3.2659
Lazov, L., N., Angelov, Influence of some technological parameters on the contrast of laser marking on the fly, Laser Physics, (2012) Volume 22, 1755-1758, https://doi.org/10.1134/S1054660X12110084
Lazov, L.K., Petrov, N.A., Investigation of the impact of the number of repetitions and the defocus on the contrast of laser marking for products made of tool steel (2012) Metallofizika i Noveishie Tekhnologii, 34 (7), pp. 1003-1011. https://www.scopus.com/inward/record.uri?eid=2-s2.084868115719&partnerID=40&md5=239b1b7e680d15bed534cb55fc9cbdb0
Lazov, L., V Nikolić, S Jovic, M Milovančević, H Deneva, E Teirumenieka, Evaluation of laser cutting process with auxiliary gas pressure by soft computing approach, Infrared Physics & Technology, (2018), 91, 137-141, DOI: 10.1016/j.infrared.2018.04.007
Mitev,I., Optimizing of induction heating depending of the electromagnetic field – part|II, 13th International conference RaDMI 2013, Kopaonik, Serbia, 12÷15 September, 2013, vol.2, p.888÷893.
Nenov., N., P., Tomchev, R., Ivanova, Study of the Ion Radiation Influence on the Parameters of Unijunction Tran-sistors, 9th International Scientific and Practical Confe-rence “Environment. Technology. Resources”. Vol.1, Latvia, Rēze-kne, 2013. Rēzekne: Rēzeknes Augstskola, RA izdevniecība, 2013, ISSN 1691-5402, ID in database – 16424, pp.137-139.
Nikolova, Neli, Intellectual Capital Management used for Optimizing the Activities of Modern Small and Medium Enterprises/Companies. 4th International Conference Econo-mics and Management-Based on New Technologies, EMoNT 2014, 12-15 June 2014, Vrnjačka Banja, Serbia., pp.258-262, ISBN 978-86-6075-045-9.
Petrova, D., Analysis of SMEs in Bulgaria – Assessment of Their Innovation Activities, Rezekne 2013, Latvia, Rezekne Higher Education Institution, Faculty of Engineering, Scientific Institute for Regional Studies, Environment. Technology. Resources, Proceedings of the 9th International Scientific and Practical Conference June 20-22, 2013, Volume 3, ISSN 1691-5402,pp 46-49. scopus
Petrova, D., Intelligent, Innovative and Sustainable Industry in Bulgaria – Prospekts and Challenges, Environment. Technology. Recourses – Proceeding of the 12-th International Scientific and Practical Conference, Rezekne Academy of Technologies, Rezekne, Latvia, 2019, ISSN 1691-5402, p. 210-215.
Petrova, D., Technical Parks and Zones, Business Incubators and clusters in Bulgaria at the Base of Industrial Competitiveness, International Scientific Journal “Innovations”, Year VII, Issue 1/2019, Sofia: Sci. Techn. Union of Mech. Eng., Nat. Sci. Techn. Soc. Automation In Discrete Productions, ISSN 2603-3763 (print), ISSN 2603-3771 (online), pp. 18-20.
Petrova, D., L., Lazov, Higher Education in the Republic of Bulgaria at the Crossroad – Problems and Measures to Prevent Them, “Society. Integration. Education” Proceedings of the International Scientific Conference, Volume II, Higher Education, May 22th-23th, 2020, Rezekne, Rezekne Academy of Technologies, 2020, ISSN 1691-5887, ISSN 2256-0629, pp. 214-226, http://dx.doi.org/10.17770/sie2020vol2.5158
Petrova D., S. Dimitrova, Europe 2020 – The New Strategy for Smart, Susinable and Inclusive Growth and Bulgarian Industrial Competitiveness, Rezekne 2011, Latvia, Rezekne Higher Education Institution, Faculty of engineering, Latgale Sustainable Development Research Institute, scientific Institute for Regional Studies, Environment. Technology. Resources, Proceeding of the 8th International Scientific and Practical Conference June 20-22, 2011, Volume I, ISSN 1691-5402, pp. 333-339.
Tomchev, P., N., Nenov, R., Ivanova, Instantaneous water heater with induction heater operating with grid frequency, „Research and Development in Mechanical Industry“ RaDMI 2012, 13-17 September 2012, Vrnjačka Banja, Serbia, SaTCIP Ltd., Technical-Mechanical School in Trstenik, ISBN 978-86-6075-036-7, Volume II, pp. 1214-1218.
