INNOVATIVE LASER TECHNOLOGY IN TEXTILE INDUSTRY: MARKING AND ENGRAVING

Authors

  • Yordanka Angelova Technical University of Gabrovo (BG)
  • Silvija Mežinska Rezekne Academy of Technologies (LV)
  • Lyubomir Lazov Rezekne Academy of Technologies (LV)

DOI:

https://doi.org/10.17770/etr2017vol3.2610

Keywords:

laser technologies, marking, engraving, textiles, denim clothing

Abstract

The advent of laser technology in textiles industry has established a new innovative solution, which successfully prevents some of the weaknesses in the conventional technologies. Lasers are being used in Laser Marking (Only the surface of fabric is processed, fading), Laser Engraving (Controlled cutting to depth). It has been used extensively as the replacement of some conventional dry processes like sand blasting, hand sanding, destroying, and grinding etc., which are potentially harmful and disadvantageous for the environment. The article considers some innovative laser technologies, such as marking and engraving on various textile materials. The laser applications for leather and textile processing were analysed. The report overviews systems and ways of laser marking and engraving implementations. Classification of markings was proposed. The advantages of laser marking and engraving technologies in textile fields were pointed.

Downloads

Download data is not yet available.

References

Абуталипова Л.Н., Гатиятуллина Р.Ф. Модификация поверхности полимерных текстильных материалов под воздействием

Angelov, N., "Optimization of the marking process with a laser radiation of the tool steel specimens “, PhD Thesis, 2011

Angelova, Y., “Investigation on Laser Marking Process of Industrial Materials”, PhD Thesis, 2017.

Angelova, Y.,L.Lazov, “Laser technology in textile industry”, 46 International Congress IFKT, 6-8 Sept. 2012, Sinaia, Romania

Валиулин А., С.Горный, Ю.Гречко, М.Патров, К.Юдин, В.Юревич, “Лазерная маркировка материалов”, Научно-технический журнал Фотоника, № 3/2007, с.16-22, 2007

Вебер, Х., Г. Херцигер, Лазери - физически основи и приложения, Наука и изкуство, София, 1984

Вейко, В., Технологические лазеры и лазерное излучение, ГУ ИТМО, Санкт-Петербург, 2007

Динев, Ст., Лазерите в модерните технологии, Алфа, София, 1993

Кеворкян, А., Текстилно материалознания и изпитвания,Техн.,София,1977

Лазов Л., Приложение на лазерите в машиностроенето, МК, АМТЕХ 07, ТУ Габрово,2007 т. II с. 33-39

Наредба за маркировката за съответствие със съществените технически изисквания към продуктите, Приета с ПМС № 164, обн., ДВ, бр. 66 от 11.08.2000

Хисамиева, Л., и др.“Декорирование поверхности текстильных полимерных материалов с помощью лазерной технологии” Журнал Вестник Казанского технологического университета, стр 127,128, 2012.

Belforte, D., 2015 industrial laser market outperforms global manufacturing instability, Industrial lasers Solutions,

Belforte, D., Marks & Spencer to become first British retailer to use innovative laser labeling, 18.06.2014,

Bosman, J., Processes and strategies for solid state q-switch laser marking of polymers, PhD Thesis, 2007

Csanák, E., “Sustainable Concepts And Eco-Friendly Technologies In The Denim Industry”, 19–20 Nov. 2014, Budapest, Hungary

Gaebler, Fr., M. Schulze,“Sealed CO2 Laser Update Product Trends Driven by Diverse Applications”. LTJ June No.3,WILEY-VCH Verlag GmbH&Co., Weinheim, 2007

Esterves, F, Alonso H., “Effect of CO2 laser radiation on surface properties of synethics fibres”. Research Journal of Textile and Apparel, 11(3):42, 2007

Ferrero F, Testore F, Innocenti R, Tonin C., “Surface degradation of linen textiles induced by laser treatment: comparsion with electron beam and heat source”, AUTEX Research Journal. Vol.2(3), 2002

Juciene, M., V. Urbelis, Ž. Juchnevičienė, L.Čepukonė, “The effect of laser technological parameters on the color and structure of denim fabric”, TRJ, Vol. (2013) July 12, 2013

Khalil, El., “Sustainable and Ecological Finishing Technology for Denim Jeans”, AASCIT Communications (American Association for Science and Technology), 2015, Vol.2, Issue 5 July 10, pp. 159-163

LATI Industria Termoplastici S.p.A., Italy, Laser Marking of Thermoplastics, 05.01.2016

Laser marking technologies, Sintec Optronics Technology Pte Ltd, 2016

Lazov, L., Hr. Deneva, P. Narica, Laser Marking Methods, ISSN 1691-5402, © Rezekne Higher Education Institution (Rēzeknes Augstskola), Rezekne 2015

Matthews, J., “Textiles in Three Dimensions: An investigation into processes employing laser technology to form design-led threedimensional textiles”, PhD thesis, Loughborough University, 28 February 2011

Nayak, R., R.Padhye, The use of laser in garment manufacturing: an overview, Fashion and Textiles, Springer Open Journal, 2016

Nourbakhsh, S. &Ashjaran, A., 2012, ‘Laser Treatment of Cotton Fabric for Durable Antibacterial Properties of Silver Nanoparticles’, Materials, 5, Pp. 1247-1257

Ortiz-Morales, M.,et.al, “Comparison between Characteristics of Various Laser-based Denim Fading Processes”, Optics and Lasers in Engineering, Elsevier, 39, p.15–24, 2003

Overton, G.,D. Belforte, A.Nogee, C.Holton, Laser Marketplace 2015: Lasers surround us in the Year of Light, Tulsa, 01.16.2015

Schuőcker D., Handbook of the Eurolaser Academy, Chapman& Hall, London,1998

Schuőcker, D., G. Schuocker, Advanced Laser Materials Processing, CO2 Laser,

SEI Laser Introduces Digital And Eco Sustainable Laser Solutions At ITMA’2015, TWM, 18January 2016

Siegman, A., LASERS, Mill Valley University Science Books, CA, 1986

Solaiman. Md., J. Saha, Comparative Analysis of Manual Fading and Laser Fading Process on Denim Fabric, Science Discovery, Vol.3(6), pp 44-49, Dec. 2015

Steen,M.W., J.Mazumder, Laser Material Processing, Springer, 2010

Štěpánková, M. et.al, “Impact of laser thermal stress on cotton fabric”. Fibers and Textiles in Eastern Europe, Vol.18, N3, p.70-73, 2010

Yuan, G., Jiang, S., Newton, E., Fan, J. & Au, W., ‘Fashion Design Using Laser Engraving Technology’, 8ISS Symposium-Panel on Transformation, Pp. 65-69

Laserschneiden und -gravieren von Textilen, EurolaserGmbH, avr, 2009, 2 www.avronline.de

Laserbearbeitung für das Automobil-Interieur,urolaserGmbH, avr, 2010, 9 www.avronline.de

US 6753501 B1, Processing of textile materials using laser beams and material sized in larger widths, Jun 22, 2004

www.sp-laser.ru/aktualnye-woprosy-otwety.html , [Accessed:30.10.2016]

www.trumpf.com/en.html TRUMPF LaserTechnology, [Accessed: 28.10.2016]

www.markpro.ru/lazer.html Лазерная маркировка, [Accessed: 28.08.2015]

www.dapramarking.com/data-matrix.htm 2D Data Matrix Code Products [Accessed: 26.10.2015]

www.cemark.bg/bg/lazeri/ , [Accessed: 21.11.2016]

www.pulslight.net/laser-marking/ , Pulslight-Laser systems, [Accessed: 20.12.2014]

http://www.goldenlaser.cc/gallery/page/4 [Accessed: 17.04.2017]

Downloads

Published

2017-06-15

How to Cite

[1]
Y. Angelova, S. Mežinska, and L. Lazov, “INNOVATIVE LASER TECHNOLOGY IN TEXTILE INDUSTRY: MARKING AND ENGRAVING”, ETR, vol. 3, pp. 15–21, Jun. 2017, doi: 10.17770/etr2017vol3.2610.