Evaluation of Biomass Briquetting Mechanism

Authors

  • Edgars Repsa Latvia University of Agriculture
  • Eriks Kronbergs Latvia University of Agriculture
  • Andris Kronbergs Latvia University of Agriculture

DOI:

https://doi.org/10.17770/etr2013vol1.824

Keywords:

Briquetting mechanisms, Common reed briquetting

Abstract

The main task of this investigation is evaluation of patented (LV 14604 B) biomass briquetting mechanism. Theoretical relationship between necessary drive force and resistance force during pressing in die was determined. Briquettes from grinded common reed (Phragmites Australis) or common reed-peat mixture were produced with designed experimental briquetting press. Density of common reed briquettes depending on the size of particles was stated. Density of briquettes obtained during compacting was from 826.3±16.4 to 934.5±35.1 kg m-3. The minimum of density 826.3±16.4 kg m-3 had briquettes with particles from 6 mm grinding screen, but maximum density 934.5±35.1 kg m-3 had briquettes, when particles from 1.5 mm grinding screen had been used. Compositions of reed particles with peat allow obtaining briquettes density > 1000 kg m-3 if peat proportion in mixture is 30%. Results of theoretical and experimental investigation show that the designed pressing mechanism can be recommended for mobile biomass briquetter design.

Downloads

Download data is not yet available.

Author Biographies

  • Edgars Repsa, Latvia University of Agriculture
    Faculty of Engineering, Institute of Mechanics
  • Eriks Kronbergs, Latvia University of Agriculture
    Faculty of Engineering, Institute of Mechanics
  • Andris Kronbergs, Latvia University of Agriculture
    Faculty of Engineering, Institute of Mechanics

References

Land politics statement for years 2008. – 2014. The Order of the Cabinet of Ministers of the Republic of Latvia Nr. 613 (in Latvian), http://www.mk.gov.lv, (Accessed on 20.02.2013).

R.M. Dreizler, C. S. Ludde. Theoretical Mechanics: Theoretical Physics 1. New York: Springer, 2011, 412 p. ISBN978-3-642-11137-2.

BS EN 14774-2:2009: Solid biofuels Determination of moisture content – Oven dry method – Part 2: Total moisture – Simplified method.

E. Alakangas. European standards for fuel specification and classes of solid biofuels. In Grammelis P. (ed.): Solid biofuel for energy: lower greenhouse gas alternative. Springer, New York, 2011, pp. 21–41. ISSN1865-3529.

M. Matúš, P. Križan. Influence of structural parameters in compacting process on quality of biomass pressings. Journal of applied mathematics. Volume 3, Number 3, 2010, p. 87 – 96.

Downloads

Published

2015-08-06

How to Cite

[1]
E. Repsa, E. Kronbergs, and A. Kronbergs, “Evaluation of Biomass Briquetting Mechanism”, ETR, vol. 1, pp. 186–189, Aug. 2015, doi: 10.17770/etr2013vol1.824.