LASER ABLATION OF PAINT COATINGS IN INDUSTRY

Authors

  • Lyubomir Lazov Rezekne Academy of Technologies (LV)
  • Nikolay Angelov Technical University of Gabrovo (BG)
  • Edmunds Teirumnieks Rezekne Academy of Technology (LV)
  • Imants Adijāns Rezekne Academy of Technology (LV)
  • Antons Pacejs Rezekne Academy of Technology (LV)
  • Ērika Teirumnieka Rezekne Academy of Technology (LV)

DOI:

https://doi.org/10.17770/etr2021vol3.6662

Keywords:

laser ablation, paint, advantages, factors, laser paint cleaning system

Abstract

A comparison is made between the laser and sandblasting methods for removing paint from industrial facilities. The advantages of laser ablation are discussed. The possibilities of laser paint removal systems - stationary and moving - are shown. The main factors influencing the laser ablation process and the indicators that determine the quality of the obtained surface are systematized. Researchers' publications on this technological process are analyzed.

Downloads

Download data is not yet available.

References

Guo, H, R. Martukanitz, T. DebRoy, Laser assisted cleaning of oxide films on SUS409 stainless steel, Journal of Laser Applications, 2004, 16(4): 236–244. DOI: https://doi.org/10.2351/1.1809639

Kumar, An., V. Sonar, D. Das, R. Bhatt, P. Behere, M. Afzal, Ar. Kumar, J. Nilaya, D. Biswas, Laser cleaning of tungsten ribbon, Applied Surface Science, 2014, 308: 216–220., DOI: https://doi.org/10.1016/j.apsusc.2014.04.138

Brygo, F., C. Dutouquet, F. Le Guern, R. Oltra, A.Semerok, J. Weulerssea, Laser fluence, repetition rate and pulse duration effects on paint ablation, Applied Surface Science, 2006, 252(6): 2131–2138. DOI: 10.1016/j.apsusc.2005.02.143

Chen, G., T. Kwee, K. Tan, Y. Choo, M. Hong, Laser cleaning of steel for paint removal, Applied Physics A, 2010, 101(2): 249–253, DOI: https://doi.org/10.1007/s00339-010-5811-0

U.S. Department of the Navy Carderock Division; Naval Surface Warfare Center; Peterson Builders Inc.,The National Shipbuilding Research Program: Surface Preparation and Coating Handbook; IIT Research Institute: Chicago, IL, USA, 1994. https://apps.dtic.mil/sti/pdfs/ADA447625.pdf

Chen, G., T. Kwee; K. Tan, Y. Choo, M. Hong, High-power fibre laser cleaning for green shipbuilding. Journal of Laser Micro / Nanoengineering, 2012, 7(3):249-253. DOI: 10.2961/j1mn.2012.03.0003

Ke, L.; H. Zhu, W. Lei, Z. Cheng, Laser cleaning of rust on ship steel using TEA CO2 pulsed laser. In Photonics and Optoelectronics Meetings (POEM) 2009: Industry Lasers and Applications; International Society for Optics and Photonics: Bellingham,WA, USA, 2009; Volume 7515, 75150G1-75150G8, DOI: 10.1117/12.846775

Madhukar, Y., S. Mullick, D. Shukla, S. Kumar, A. Nath, Effect of laser operating mode in paint removal with a fiber laser, Applied Surface Science, 2013, 264, 892–901, DOI: https://doi.org/10.1016/j.apsusc.2012.10.193

Tsunemi, A., K. Hagiwara, N. Saito, K. Nagasaka, Y. Miyamoto, O. Suto, H. Tashiro, Complete removal of paint from metal surface by ablation with a TEA CO2 laser, Applied Physics A, 1996, 63, 435–439, https://link.springer.com/article/10.1007/BF01571670

Schmidt, M.J.J.; Li, L.; Spencer, J.T. An investigation into the feasibility and characteristics of using a 2.5 kW high power diode laser for paint stripping, Journal of Materials Processing Technology, 2003, 138, Issues 1-3, 109–115, DOI: https://doi.org/10.1016/S0924-0136(03)00057-8

Barletta, M.; Gisario, A.; Tagliaferri, V. Advance in paint stripping from aluminium substrate, Journal of Materials Processing Technology, 2006, 173, Issue 2, 232–239, DOI: https://doi.org/10.1016/j.jmatprotec.2005.11.029

Zou, W., Y. Xie, X. Xiao, X. Zeng, Y. Luo, Application of thermal stress model to paint removal by Q-switched Nd: YAG laser, Chinese Physics B, Volume 23, Number 7, 074205, 2014, DOI: 10.1088/1674-1056/23/7/074205

Lu, Y.F.; Song,W.D.; Ang, B.W.; Hong, M.H.; Chan, D.S.H.; Low, T.S. A theoretical model for laser removal of particles from solid surfaces, Applied Physics A, 1997, 65, 9–13, DOI: https://doi.org/10.1007/s003390050533

Tam, A., W. Leung, W. Zapka, W. Ziemlich, Laser-cleaning techniques for removal of surface particulates, Journal of Applied Physics, 1992, 71, 3515–3523, DOI: https://doi.org/10.1063/1.350906

Kelley, J.D.; Hovis, F.E. A thermal detachment mechanism for particle removal from surfaces by pulsed laser irradiation, Microelectronic Engineering, 1993, 20 (1-2), 159–170, DOI: https://doi.org/10.1016/0167-9317(93)90213-O

Turner, M., P. Crouse, L. Li, A. Smith, Investigation into CO2 laser cleaning of titanium alloys for gas-turbine component manufacture, Applied Surface Science., 2006, 252 (13), 4798–4802, DOI: https://doi.org/10.1016/j.apsusc.2005.06.061

Gathers, G., Thermophysical properties of liquid copper and aluminum International Journal of Thermophysics, 1983, 4, 209–226, DOI: https://doi.org/10.1007/BF00502353

Li, X., T. Huang, W. Chong, R. Zhou, Y. S. Choo, M. Hong, Laser cleaning of steel structure surface for paint removal and repaint adhesion, Opto-Electronic Engineering, 2017, 44(3): 340-344, DOI: 10.3969/j.issn.1003-501X.2017.03.009

Liu, K., E. Garmire, Paint removal using lasers, Applied Optics 34(21):4409-4415, 1995, DOI: 10.1364/AO.34.004409

Razab, M., A. Noor, M. Jaafar, N. Abdullah, F. Suhaimi, M. Mohamed, N. Adam, N. Jusuf, A review of incorporating Nd: YAG laser cleaning principal in automotive industry, Journal of Radiation Research and Applied Sciences, Vol. 11, Issue 4, 2018, DOI: https://doi.org/10.1016/j.jrras.2018.08.002

Siano, S., J. Agresti, I. Cacciari, D. Ciofini, M. Mascalchi, I. Osticioli, A. Mencaglia, Laser cleaning in conservation of stone, metal, and painted artifacts: state of the art and new insights on the use of the Nd: YAG lasers, Applied Physics A, Volume 106, Issue 2, 419-446, 2012, DOI: https://doi.org/10.1007/s00339-011-6690-8

Bergström, D., J. Powell, A. Kaplan, The absorptance of steels to Nd: YLF and Nd: YAG laser light at room temperature, Applied Surface Science Vol. 253 Issue 11 (2007): 5017-5028, DOI: https://doi.org/10.1016/j.apsusc.2006.11.018

Mongelli, G., Portable handheld laser small area supplemental coatings removal system retrieved from Dayton, Ohio, United States, 2005, https://apps.dtic.mil/sti/pdfs/ADA451223.pdf

Laser Paint Stripping, Laser Cleaning and Coating Removal Solutions, Lasertronics.com, General Lasertronics Corporation, www.lasertronics.com/wp/applications/ship-maintenance/

Dichev, D., I. Zhelezarov, T. Karadzhov, N. Madzharov and D. Diakov, "Method for measuring motion parameters of moving objects," 12th International Scientific and Practical Conference on Environment, vol. 3, 27-31, 2019, DOI: 10.17770/etr2019vol3.4131

G. Cvetanov, T. Karadzhov and R. Miteva, "Determination of the elastic displacements in plain strained condition of involute cylindrical gears with asymmetric profile," in 46th International Conference on Applications of Mathematics in Engineering and Economics, Sofia Bulgaria, 2021. DOI: 10.1063/5.0042511

Zlateva-Petkova, T., Human Resources Quality as a Factor for Competitive Power of Organizations, State University SUMI, vol. 3, pp. 207-212, Ukraine, 2011, ISSN 2218-4511, https://www.researchgate.net/publication/279473856_Human_resources_quality_as_a_factor_for_competitive_power_of_organizations

Downloads

Published

2021-06-16

How to Cite

[1]
L. Lazov, N. Angelov, E. Teirumnieks, I. Adijāns, A. Pacejs, and Ērika Teirumnieka, “LASER ABLATION OF PAINT COATINGS IN INDUSTRY”, ETR, vol. 3, pp. 187–194, Jun. 2021, doi: 10.17770/etr2021vol3.6662.