INFLUENCE OF THE ANODE AND WEHNELT VOLTAGE ON THE CROSSOVER POSITION IN THE ELECTRON BEAM WELDING

Manahil Tongov

Abstract


Through the numerical modelling methods, the influence of the wehnelt voltage anode voltage on the crossover position of the electron beam welding (EBW) was monitored and analysed. The finite element method (FEM) is used to obtain the simulation results. The formation of the electron beam in the electrostatic part of an electron optic system (EOS) is described by solving the electrostatic task. To obtain the current emitted from cathode, electrical and thermal tasks are solved in the cathode node and Richardson-Dushman equation is used with Schottky correction. By using the results of the electrostatic field, the active emission spot is determined. By simulating the movement of the emitted electrons under the action of the electrostatic field, the shape of the beam is determined and the distance between the cathode and the electrostatic focus is found. The results of the influence of the wehnelt and anode voltage on the magnitude of the emission current and the position of the crossover, as well as the beam dimensions in crossover and anode outlet section at constant cathode heating current are presented.

Keywords


EBW; modelling; crossover; FEM

Full Text:

PDF

References


S. David, T. Debroy, “Current Issues and Problems in Welding Science”, Science Vol.257 Issue 5069, pp. 497-502, (1992), DOI: 10.1126/science.257.5069.497

S. Kou “Welding Metallurgy” A John Wiley&Sons, Inc.Publication, (2002), 460p., ISBN 978-0-471-28496-3

G. Mladenov “Electron and ion technologies”, Prof. Marin Drinov Publishing House of Bulgarian Academy of Scienses, 2009, 387p., ISBN 978-954-322-345-9.

Y.Arata “Plasma, Electron and Laser Beam Technology” American Society for Metals, (1986) 630p., ISBN-13: 978-0871702548

Y. Arata, K. Terai and S. Matsuda, Transaction of JWRI, Vol. 2, n.1(1973)103.

S. Shiller U. Heisig and S. Panzer ”Elektronenstrahltechnologie” Forschungsinstitut Manfred von Ardene, Dresden, VEB Verlag Technik, (1972)528p

V. Adam et al.: “Elektronenstrahlschweißen”. pro-beam AG & Co. KgaA, München (2011).

P. Petrov and S. Sabchevski “Parameters used for electron beam welding - A comparative study” Proc. 8th Int. Conf. Beam Technology, Halle, pp. 92-94, (2010).

M. Dulău and L. David, “Modeling and simulation of electron’s trajectory inside of electron beam gun”, CEAI, Vol. 9, No. 1, pp. 27-32, 2007.

M. Tongov and P. Petrov, “Study of physical processes in optical system for electron beam welding”, TEMEL-ij, Valume 1, issue 2, oct. 2017. pp 85-94, ISSN 2545 – 4390

V. Shcherbakov, M. V. Ivashchenko, A. S. Kozhechenko, and M. S. Gribkov, “Parametric Analysis in the Design of Technological Electron Beam Guns”, ISSN 1068-3712, Russian Electrical Engineering, 2016, Vol. 87, No. 1, pp. 41–45. © Allerton Press, Inc., 2016, doi.org/ 10.3103/ S1068371216010089.

E. Lassner and W. Schubert, “Tungsten Properties, Chemistry, Technology of the Element, Alloys, and Chemical Compaunds”, ISBN 978-1-4613-7225-7, Springer Science+Business Media New York, 1999

P. Lacki, K. Adamus, K. Wojsyk, M. Zawadzki and Z. Nitkiewicz, “Modeling of heat source based on parameters of electron beam welding process”, ARCHIVES OF METALLURGY AND MATERIALS Volume: 56 Issue: 2 Pages: 455-462 DOI: 10.2478/v10172-011-0049-1

Y. Seregin, A. Murygin, V. Laptenok and V. Tynchenko, “Modeling of electron beam distribution in electron beam welding”, IOP Conference Series: Materials Science and Engineering, Volume 450, Issue 3, 30 November 2018, Article number 03203, doi:10.1088/1757-899X/450/3/032036




DOI: http://dx.doi.org/10.17770/etr2019vol3.4183

Refbacks

  • There are currently no refbacks.


SCImago Journal & Country Rank