REFINING VENT EMISSIONS FROM FINE DROPLET AEROSOLS

Authors

  • S. M. Puring Samara State Technical University, Institute of Architecture and Civil Engineering (RU)
  • D. N. Vatuzov Samara State Technical University, Institute of Architecture and Civil Engineering (RU)
  • N. A. Novopashina Samara State Technical University, Institute of Architecture and Civil Engineering (RU)

DOI:

https://doi.org/10.17770/etr2017vol1.2640

Keywords:

purification devices, ventilation emissions, high-dispersity aerosols

Abstract

Vent emissions from industrial enterprises cause air pollution to a great extent. These emissions contain solid or liquid particles. it is necessary to install cleaning units for those particles. Existing methods of cleaning as applied to fine droplet aerosols have a number of limitations, especially within liquid disperse phase. This is why it is relevant to design highly-efficient cleaning units for vent emissions refining from droplet aerosols of sub-micron sizes. The research reveals the most important parameters for designing highly-efficient cleaning units for vent emissions refining from droplet aerosols. The authors designed a pilot plant and performed a series of experiments to define the optimal geometrical characteristics and modes of operation for cleaning units. These theoretical and experimental studies mase it possible to design three types of cleaning units with precipitating elements in the form of pipes and slotted channels with L/D = 250 dimensions.

Downloads

Download data is not yet available.

References

I.A. Hurin, N.P. Tyurin, Ochistka pechnyh gazov pri plavke alyuminievogo loma [Furnace gases purification during aluminium scrap melting process]. Regionalnaya arhitektura i stroitelstvo [Regional architecture and construction], 2, 2011, pp.149-154.

V. Uajt, Tekhnologiya chistyh pomeshchenij [Cleanroom technology: design, test and exploitation basis]. Moskva, 2002.

E.V. Sugak, N.A. Vojnov, N.A. Nikolaev, Ochistka gazovyh vybrosov v apparatah s intensivnymi gidrodinamicheskimi rezhimami [Gas emissions purification in the devices with intense hydrodynamic regimes], Kazan, 2009.

L.I. Zajchik, V.M. Alipchenkov, Statisticheskie modeli dvizheniya chastits v turbulentnoj zhidkosti [The statistical model of particle motion in a turbulent fluid]. Moskva, 2007.

D. Eskin, J. Ratulowski, K. Akbarzadeh Modeling of particle deposition in a vertical turbulent pipe flow at a reduced probability of particle sticking to the wall. Chemical Engineering Science, V.66, I.20, 2011, pр.4561-4572.

S.M. Puring, D.N. Vatuzov, Eksperimentalnye issledovaniya po opredeleniyu konstruktivnyh osobennostej apparatov po ochistke vozduha ot submikronnyh chastits [Experimental studies into determing the design features of devices for cleaning air from sub-micron particles]. Nauchnoe obozrenie, 4, 2014, pp. 90-93.

P.I. Basmanov, V.N. Kirichenko, Yu.N. Filatov, Yu.L. Yurov, Vysokoeffektivnaya ochistka gazov ot aerozolej filtrami Petryanova [High-performance gas purification from aerosol by Petryanov Filters]. Moskva, 2002.

S.M. Puring, D.N. Vatuzov, N.P. Tyurin. Parameter choice optimization of ventilating air cleaning equipment while designing and constructing industrial buildings. Procedia Engineering, V.153, 2016, pр. 563-568.

Patent RF 2246340. Plastinchatyj separator aerozolya [Patent of the Russian Federation 2246340 entitled tiled-plate aerosol separator]. Byul.№5, 2005.

Patent RF 2259861. Separator tumanov s izognutymi plastinchatymi osaditelnymi elementami [Patient of the Russian Federation 2259861 entitled the mist separator with curved plate sttling elements], Byul.№25, 2005.

Patent RF 2327508. Koaksialnyj separator kapelnogo aerozoly [Patent of the Russian Federation 2327508 entitled dropping aerosolcoaxial separator]. Byul.№ 18, 2008.

Downloads

Published

2017-06-15

How to Cite

[1]
S. M. Puring, D. N. Vatuzov, and N. A. Novopashina, “REFINING VENT EMISSIONS FROM FINE DROPLET AEROSOLS”, ETR, vol. 1, pp. 220–223, Jun. 2017, doi: 10.17770/etr2017vol1.2640.