NEW ENVIRONMENTALLY FRIENDLY DUST SUPPRESSANT BASED ON LIGNOCELLULOSIC BIOMASS FROM WOOD PROCESSING WASTEWATER

Authors

  • Sanita Vitolina Latvian State Institute of Wood Chemistry
  • Galia Shulga Latvian State Institute of Wood Chemistry
  • Brigita Neiberte Latvian State Institute of Wood Chemistry
  • Skaidrite Reihmane Riga Technical University
  • Elina Zhilinska Latvian State Institute of Wood Chemistr

DOI:

https://doi.org/10.17770/etr2017vol3.2542

Keywords:

coagulation, composite coagulant, dust suppressant, lignocellulosic biomass, wastewater

Abstract

In this work, the possibility of usage of lignocellulosic biomass derived from wood processing wastewater as an environmentally friendly dust suppressant was studied. To increase the efficiency of the recovery of lignocellulosic biomass, a new developed composite coagulant, representing a polymer-colloid complex of polyethyleneimine with polyvalent metal ions, was applied. The effectiveness of the composite coagulant was examined using a model solution simulating the wastewater of hydrothermal treatment of birch wood. The optimum content of PEI in the composite coagulant was found to be 25-35%. At the optimal composite coagulant dosage and pH value, the yield of the total wood biomass achieved 97%, but the extraction of lignin and lignin-like substances was more than 65%. Due to the polymeric and polyfunctional nature, the recovered wood biomass had glue properties. Taking into account the fact that the dust at the surface of unpaved roads poses considerable environmental problems, the biomass was tested as a structuring agent for sandy and model sandy-clay soils. The obtained results have shown that the separated lignocellulosic biomass was capable of forming large sandy aggregates that were able to decrease the dusty soil blowing off from the unpaved road surface.

Downloads

Download data is not yet available.

References

I. Mayer and G. Koch, "Element content and pH value in American black cherry (Prunus serotina) with regard to colour changes during heartwood formation and hot water treatment," Wood Sci. Technol., vol. 41, no. 6, 2007, pp. 537-547.

A. Rohumaa, A. Yamamoto, C. Hunt, C. Frihart, C. Hughes and J. Kers, "Effect of log soaking and the temperature of peeling on the properties of rotary-cut birch (Betula pendula Roth) veneer bonded with phenol-formaldehyde adhesive," Bioresources, vol. 11 no. 3, 2016, pp. 5829-5838.

C. Hu, H. Liu, J. Qu, D. Wang and J. Ru, "Coagulation behaviour of aluminium salts in eutrophic water: significance of Al13 species and pH control," Environ. Sci. Technol., vol. 40, 2006, pp. 325-331

T. Sun, L.-L. Liu, L.-L. Wan and Y.-P. Zhang, "Effect of silicon dose on preparation and coagulation performance of poly-ferric-aluminum–silicate–sulfate from oil shale ash," Chem. Eng. J. vol. 163, 2010, pp. 48-54.

S. Chakrabarti, S. Banerjee, B. Chaudhuri, S. Bhattacharjee and B.K. Dutta, "Application of biodegradable natural polymers for flocculated sedimentation of clay slurry," Bioresour. Technol., vol. 99, 2008, pp. 3313-3317.

W. Brostow, H. E. H. Lobland, S. Pal and R. P. Singh, "Polymeric flocculants for wastewater and industrial effluent treatment," J. Mater. Ed., vol. 31, 2009, pp. 157-166.

K. E. Lee, N. Morad, T. T. Teng and B. T. Poh, "Development, characterization and the application of hybrid materials in coagulation/flocculation of wastewater: A review," Chem. Eng. J., vol. 203, 2012, pp. 370-386.

T. Ahmad, K. Ahmad and M. Alam, "Sustainable management of water treatment sludge through 3‘R’ concept," Journal of Cleaner Production, vol. 124, 2016, pp. 1-13.

C. Huang, J. R. Pan, K. D. Sun and C. T. Liaw, "Reuse of water treatment plant sludge and dam sediment in brick making," Water Sci. Technol., vol. 44, no. 10, 2001, pp. 273-277.

O. Kizinievic, R. Zurauskiene, V. Kizinievic and R. Zurauskas, "Utilisation of sludge waste from water treatment for ceramic products," Constr. Build. Mater. vol. 41, 2013, pp. 464-473.

Q. C. Nowasell and J. T. Kevern, "Using drinking water treatment waste as a lowcost internal curing agent for concrete," ACI Mater. J., vol. 112, no. 1, 2015, pp. 69-78.

J. R. Pan, C. Huang and S. Lin, "Reuse of fresh water sludge in cement making," Water Sci. Technol., vol. 50, no. 9, 2004, pp. 183-188.

C.-H. Huang and S.-Y. Wang, "Application of water treatment sludge in the manufacturing of lightweight aggregate," Constr. Build. Mater., vol. 43, 2013, pp. 174-183.

L. Yang, J. Wei, Y. Zhang, J. Wang and D. Wang, "Reuse of acid coagulant recovered drinking waterworks sludge residual to remove phosphorus from wastewater," Appl. Surf. Sci., vol. 305, 2014, pp. 337-346.

K. C. Makris, D. Sarkar and R. Datta, "Evaluating a drinking water waste byproduct as a novel sorbent for arsenic," Chemosphere, vol. 64, 2006, pp. 730-741.

L. W. Titshall and J. C. Hughes, "Characterization of some South African water treatment residues and implications for land application," J. Water SA, vol. 31, no. 3, 2005, pp. 299-307.

E. A. Dayton and N. T. Basta, "Characterization of drinking water treatment residuals for use as a soil substitute," Water. Environ. Res., vol. 73, no. 1, 2001, pp. 52-57.

G. Shulga, S. Vitolina, J. Brovkina, B. Neiberte, A. Verovkins, M. Puķe and N. Vedernikovs, "Wood biomass from the model wastewater and its fractionation," in Proceedings of the 9th International Scientific and Practical Conference. Environment. Technology. Resources, Vol. 1, 2013, pp. 190-194.

G. Shulga, J. Brovkina, B. Neiberte, J. Ozoliņš and R. Neilands, "A method for wastewater treating from lignin and hemicellulose substances at wood processing plants," LV Patent 14789A, January 20, 2014.

Z. Liu, Y. Ni, P. Fatehi and A. Saeed, "Isolation and cationization of hemicelluloses from pre-hydrolysis liquor of kraft-based dissolving pulp production process," Biomass Bioenerg., vol. 35, 2011, pp. 1789-1796.

Downloads

Published

2017-06-15

How to Cite

[1]
S. Vitolina, G. Shulga, B. Neiberte, S. Reihmane, and E. Zhilinska, “NEW ENVIRONMENTALLY FRIENDLY DUST SUPPRESSANT BASED ON LIGNOCELLULOSIC BIOMASS FROM WOOD PROCESSING WASTEWATER”, ETR, vol. 3, pp. 343–349, Jun. 2017, doi: 10.17770/etr2017vol3.2542.