EFFECT OF THE ACIDIC TREATMENT OF DOMESTIC WOOD RESIDUE ON BIOCOMPOSITE WETTABILITY AND MOISTURE SORPTION PROPERTIES

Authors

  • Jevgenijs Jaunslavietis Laboratory of Lignin Chemistry, Latvian State Institute of Wood Chemistry
  • Galia Shulga Laboratory of Lignin Chemistry, Latvian State Institute of Wood Chemistry
  • Jurijs Ozolins Faculty of Materials Science and Applied Chemistry
  • Brigita Neiberte Laboratory of Lignin Chemistry, Latvian State Institute of Wood Chemistry
  • Anrijs Verovkins Laboratory of Lignin Chemistry, Latvian State Institute of Wood Chemistry
  • Sanita Vitolina Laboratory of Lignin Chemistry, Latvian State Institute of Wood Chemistry
  • Sandra Livca Laboratory of Lignin Chemistry, Latvian State Institute of Wood Chemistry

DOI:

https://doi.org/10.17770/etr2017vol1.2538

Keywords:

Mild Acidic Treatment, Moisture Sorption, Wettability, Wood-Polymer Composite, Wood Residue

Abstract

The aim of the work was to evaluate the effect of the acidic treatment temperature of aspen sawdust as a filler on the moisture sorption, wetting and mechanical properties of wood-polymer composites. Aspen wood sawdust was treated with the dilute hydrochloric acid solution at 60oC and 90oC during 5 h. Both the treated particles and the filled composites were studied in terms of moisture sorption and wettability; their surface free energy was calculated using the Owens-Wendt-Rabel-Kaelble (OWRK) approach. The obtained results have shown that the acidic treatment of aspen wood sawdust at 90oC leads to an increase in its hydrophobicity that decreases the wettability and moisture sorption of the obtained composite and increases its mechanical properties.

Downloads

Download data is not yet available.

References

D. Klemm, B. Heublein, H. P. Fink and A. Bohn, “Cellulose: Fascinating biopolymer and sustainable raw material,” Angew. Chem., Int. Ed., vol. 44, 2005, pp. 3358-3393.

A. K. Mohanty, M. Misra and L. T. Drzal, “Sustainable Bio-Composites from renewable resources: Opportunities and challanges in the green materials world,” J. Polym. Environ., vol. 10, 2002, pp. 19-26.

M. Carus, A. Eder, L. Dammer, H. Korte, L. Scholz, R. Essel and E. Breitmayer, “Wood plastic composites (WPC) and natural fibre composites (NFC): European and Global markets 2012 and future trends,” 2014. [Online]. Available: www.bio-based.eu/markets [Accessed: Feb. 18, 2017].

M. N. Rao, R. Sultana and S. H. Kota, Solid and Hazardous waste management. Joe Hayton, 2017

C. M. Popescu, “A near infrared spectroscopic study of the structural modifications of lime (Tilia CordataMill.) wood during hydro-thermal treatment,” Spectrochim. Acta. A. Mol. Biomol. Spectrosc., vol. 115, 2013, pp. 227-233.

J. O. Nwadiogbu, P. A. C. Okoye, V. I. Ajiwe and N. J. N. Nnaji, “Hydrophobic treatment of corn cob by acetylation: Kinetics and thermodynamics studies,” J. Environ. Chem. Eng., vol. 2, 2014, pp. 1699-1704.

W. Z. W. Zahari, R. N. R. L. Badri, H. Ardyananta, D. Kurniawan and F. M. Nor, “Mechanical Properties and Water Absorption Behavior of Polypropylene / Ijuk Fiber Composite by Using Silane Treatment,” Proc. Manuf., vol. 2, 2015, pp. 573-57.

G. Shulga, J. Jaunslavietis, J. Ozolins, B. Neiberte, A. Verovkins, S. Vitolina and V. Shakels, “Properties of Recycled Polypropylene Based Composites Incorporating Treated Hardwood Sawdust,” AIP Conference Proceedings of the 8th International Conference “Times of Polymers (TOP) & Composites. From Aerospace to Nanotechnology.” Ed. A. D’Amore, D. Acierno and L.Grassia. vol. 1736, 020111 (2016); http://dx.doi.org/10.1063/1/1/4949686.

G. Shulga, B. Neiberte, A. Verovkins, S. Vitolina, J. Jaunslavietis, J. Ozolins, “Short fibre filler from wood residue for polymer composite materials,” Material Science, vol. 22, 2016, pp. 370-375,

W. Deng, Y. Song, Q. Wang and W. Wang, “Improvement of compatibility and mechanical properties of modified wood fiber/polypropylene composites”, Frontiers of Foresty in China, vol. 3, 2008, pp. 243-247.

D. Ndiaye and A. Tidjani, “Effects of coupling agents on thermal behaviour and mechanical properties of wood flour/polypropylene composites,” J. Composite Materials, vol. 46, no. 24, 2012. pp.3067-3075.

A.W. Adamson and A. P. Gast, Physical Chemistry of Surfaces. New York: John Wiley & Sons, 1997.

Downloads

Published

2017-06-15

How to Cite

[1]
J. Jaunslavietis, “EFFECT OF THE ACIDIC TREATMENT OF DOMESTIC WOOD RESIDUE ON BIOCOMPOSITE WETTABILITY AND MOISTURE SORPTION PROPERTIES”, ETR, vol. 1, pp. 129–133, Jun. 2017, doi: 10.17770/etr2017vol1.2538.