PHYSICAL PROPERTIES OF BIOMASS COMPOSITIONS

Imants Nulle, Aivars Kaķītis

Abstract


The main resources for biomass agro-ecotechnologies are cereal straw residues, energy crops and emergent vegetation from wetlands. The herbaceous biomass is a material with low density (20 – 60kg·m-3) therefore new mobile equipment and technologies for biomass communition and densification have to be worked out. The storage, dosage and mixing before compacting is necessary. Because of this we must have a working knowledge of the bulk properties of materials. The angle of repose was investigated of straw, reed and peat particles. It was stated that angle of repose of straw and reed varies between 54 – 55 degrees. Angle of repose of peat particles varies between 40 – 60 degrees. In a bin filled with solid bulk material this material acts on the walls with the horizontal stress. The stress ratio between horizontal and vertical stress is important for equipment design. This ratio was investigated for different size particles of straw, reed and peat. Stress ratio of straw and reed particles varies between ~0.6 – 0.7.


Keywords


stalk materials; biomass conditioning; biomass briquettes; angle of repose; bulk properties

Full Text:

PDF

References


Kezdi, A.: Erddrucktheorien, Springer Verlag Berlin 1962.

DIN 1055, Teil 6 Lasten in Silozellen, Deutsche Norm, 1987.

Zachary, L. W., Lohnes, R. A.: A confined compression test for bulk solids, Proc. 13th Annual Powder & Bulk Solids Conf., May 1988, Rosemont, IL, USA.

Kwade, A., Shulze, D., Schwedes, J.: Determination of the Stress Ratio in Unaxial Compression Tests Part 1 and 2, Powder Handling & Processing 6 (1994) 1, pp. 61 – 65 and 2, pp. 199 – 203.




DOI: http://dx.doi.org/10.17770/etr2005vol1.2117

Refbacks

  • There are currently no refbacks.