Creep Behaviour of Concrete With Glass Waste Microfiller

Authors

  • Andina Sprince Riga Technical University (LV)
  • Aleksandrs Korjakins Riga Technical University (LV)
  • Leonids Pakrastinsh Riga Technical University (LV)

DOI:

https://doi.org/10.17770/etr2011vol2.1003

Keywords:

compression strength, creep, glass powder, long-term deformations, modulus of elasticity

Abstract

Every year there are several hundred tons of waste glass produced in Latvia. Glass can be re-used as a fine raw material and it presents a possibility to save natural, non-renewable materials. The use of glass powder in concrete production can make the construction industry more environmentally friendly. This paper examines the possibility of using glass powder as cement replacement in a new type of concrete. In the experiment, cement was partially (20% and 40%) replaced with glass powder. The long-term deformation (creep) of this new concrete was monitored. Three different concrete mixtures were batched. Specimens of 20% and 40% cement replacement were compared with the specimens made of standard concrete. The samples were tested in two extreme conditions: in one case they were kept in 100% humidity ensured by preventing the desiccation of the concrete, and in the other case samples were air-dried by preventing them from becoming wet. Compression strength and modulus of elasticity of 7 and 28 days old cubic samples was determined.

Downloads

Download data is not yet available.

References

Korjakins A., Shakhmenko G., Bumanis G. The Use of Borosilicate Glass Waste as Concrete Micro-Filler. Proceeding of 2nd International Conference of Advanced Construction, 2010, Kaunas, Lithuania, pp. 129-134.

Mageswari1 M. and Vidivelli B. The Use of Sheet Glass Powder as Fine Aggregate Replacement in Concrete. The Open Civil Engineering Journal, 2010, 4, pp. 65-71

Neville A. M., Dilger W. H., Brooks J. J. Neville. Creep of Plain and Structural Concrete. Construction press, 1983, London and New York, pp. 3, 11

Rilem TC 107-CSP: creep and shrinkage prediction models: principles of their formation. Measurement of time-dependent strains of concrete. Materials and Structure, Vol. 31, October 1998, pp. 507-512

Downloads

Published

2015-08-05

How to Cite

[1]
A. Sprince, A. Korjakins, and L. Pakrastinsh, “Creep Behaviour of Concrete With Glass Waste Microfiller”, ETR, vol. 2, pp. 125–131, Aug. 2015, doi: 10.17770/etr2011vol2.1003.